Pearce
Multisaws
The
Pearce Multisaw is a high volume slabbing saw which
is available in 2, 3, 4, 5, 6, 7 and 8 saw versions.
The Multisaw can cut logs up to 5 inches wide and 6
inches tall at rates up to 40 logs per minute. The
Multisaw can also be used as a stand-alone saw, or as
part of a fully automated production line. As with
all Pearce saws, a safety lock assures the utmost in
personnel safety.
Autosaw
The
Pearce Autosaw is an automated replacement for a
traditional hand band saw. The Autosaw offers
significant safety advantages along with the
consistency of machine-paced production.
|
Simple, user programmable features
allow for cutting uneven log dimensions, block
trimming, and even dimensional variance alarms.
Custom features and data logging are also
available upon request. |
| The Pearce Autosaw can be used as a
stand-alone unit or can be combined with other
Pearce Saws to create a fully automated cutting
line. |
|
Universal
Logging Saw
The
Pearce Universal Logging Saw cuts a standard 16.5
(7.5kg) fish block into 2, 3, 4, 5 or 6 logs and is
geared toward high volume production. The Universal
Log Saw used 3 blades and a PLC controlled transport
system to accurately divide a fish block in either
the 10 inch or 19 inch orientation into equal size
logs. This machine can be manually fed or combined
with other machines as a component of a fully
automated line.
Pearce
Portion Saws
The
Pearce Portion Saw uses multiple rotary saw blades on
a single arbor to produce rectangular portions and
fish fingers from slabs. Cut patterns can be easily
and quickly changed using inexpensive change parts to
produce a tremendous variety of product
configurations. With the Vertical Cutter option, a
hydraulically driven guillotine is used in
conjunction with the saw blades to produce triangles,
wedges and even custom curved shape portions. The
possibilities are limited only by your imagination.
Spreader
Conveyors
This
versatile spreading conveyor or "spreader"
is designed to be used in a production line where
either the full belt width is not being used or there
is a belt width mismatch between pieces of equipment.
Fully adjustable urethane belting allows for
adjustments to the "spread" depending upon
belt widths and product sizes.
The
engineered drive ratio is designed to drive the
urethane belting at the correct speed necessary to
maintain product orientation. The Spreader is
specifically designed for use with the Pearce Portion
Saw, but can be used in any application where belt
distribution is critical. The Spreader can also be
used in reverse allowing the product to be
"squeezed" onto a smaller belt in the case
of a belt mismatch.
Portion
Saw Loader
The
Portion Saw Loader provides the automated link
between a Pearce Multisaw and a Pearce Portion Saw.
The Loader monitors the level of product in the
portion saw magazine and controls the flow of
material from the multisaw. The Loader is completely
mechanically timed for reliability and ease of
maintenance, and is completely guarded for safety.
Pearce
Block Press
The
Pearce Block Press was designed to solve the costly
problems associated with fish blocks that do not have
uniform dimensions. The heavy duty Pearce Block Press
will transform the average shaped fish block into a
uniform block with standardized dimensions as well as
make uniform blocks from fish trim and broken pieces,
following a simple equipment conversion. Using the
Pearce Block Press means a higher yield from each
block, consistent fish weight in each portion or
stick, and uniform packages. You will also see the
elimination of rejects due to bad block formation and
a reduction of downtime.
 To make perfect blocks, the
operator places the blocks onto a loading magazine.
The block is then automatically fed to a shaping
cavity which has precise dimensions.
When the
block is in position, the press exerts up to 150 tons
of force on the block to shape it to the dimensions
of the shaping cavity.
The
Pearce Block Press can also be fitted with an
automatic feeding option.
|
